- Products
- CNC LATHE SLANT TYPE
MT Series CNC LATHE SLANT TYPE
Features:
- 30 degree slant bed design for easy operation and easy chip removal
- Cast iron bed with optimally designed ribs with integral stiffness provides an very strong rigidity
- Big diameter bearing provides high rigidity
- High-resolution encoder mounted on spindle to provide accurate C axis positioning
- C axis with continuous indexing
- Double supported ball screws direct-driven servo motors are used for axial movements
- Servo turret or hydraulic turret is offered for users as an alternative choice
- Large disc is equipped for easy tool set up
- Special spindle motor location design reduces machine floor space
- One-piece structure on the machine structure to provide massive rigidity
- Programmable tailstock available as an option
- Large coolant tank
- Internal coolant supply through turret disc
- High pressure pump
- PLC controlled chip conveyor
| MODEL | MT-100 |
|---|---|
| Machine type | Box way |
| Machine body type | Slant |
| Swing over bed | 400 mm |
| Standard turning dia | 150 mm |
| Max. turning dia | 250 mm |
| Max. turning length | 175 mm |
| Bar capacity | 42 mm |
| X-axis stroke | 220 mm |
| Z-axis stroke | 200 mm |
| Spindle speed | 6000 rpm |
| Spindle nose | A2-5 |
| Spindle thru-hole dia | 52 mm |
| Spindle bearing inside dia | 80 mm |
| Type of turret | 8 |
| Height of square tool | 20 mm |
| Dia of boring bar holder | 20 mm |
| 3-jaw Chuck | 6" |
| Stroke of tailstock | 130 mm |
| Tail sleeve dia | 60 mm |
| Taper of tailstock | MT #4 |
| Tail sleeve stroke | 75 mm |
| Rapid feed speed | X:20 / Z:20 m/min |
| Spindle motor | 7.5 / 11 kw |
| Lubricating oil motor | 0.75 kw |
| Cutting oil motor | 0.25 kw |
| Servo turrent motor | 0.75 kw |
| Electric power | 15 KVA |
| Hydraulic pressure | 20 L |
| Lubricating oil | 1.8 L |
| Cutting oil | 40 L |
| Floor space (L x W) | 1850 x 1750 mm |
| Net weight | 2400 kg |
| Standard Accessories | Optional Accessories | ||
|---|---|---|---|
| ◆ 3-jaw hydraulic chuck | ◆ Bar feeder | ||
| ◆ Hydraulic system | ◆ Parts catcher | ||
| ◆ Hydraulic tailstock | ◆ Tool setter | ||
| ◆ Live center | ◆ C-axis | ||
| ◆ Coolant system | ◆ VDI turret | ||
| ◆ Morse taper sleeve | ◆ VDI tool holders | ||
| ◆ Auto lubrication system | ◆ Auto door | ||
| ◆ Working light | ◆ Chip conveyor | ||
| ◆ Heat exchanger for electrical cabinet | ◆ Chip bucket | ||
| ◆ Soft jaw | ◆ Transformer | ||
| ◆ Foot switch for chuck clamp | ◆ CE mark | ||
| ◆ MPG hand wheel | ◆ Safety torque limit clutch | ||
| ◆ Operation & maintenance manuals | ◆ Hoisting hook package | ||
| ◆ Tools and box | ◆ Levelling kit | ||
| ◆ Levelling bolts and screws | ◆ Bar feeder interface (LNS system) | ||
| ◆ OD tool holder | ◆ Additional tool holders and sleeves | ||
| ◆ Facing tool holder | ◆ SIEMENS controller | ||
| ◆ Boring bar holder & sleeves | |||
| ◆ Drill sleeves | |||
| ◆ FANUC controller | |||
| MODEL | MT-150 |
|---|---|
| Machine type | Box way |
| Machine body type | Slant |
| Swing over bed | 400 mm |
| Standard turning dia | 200 mm |
| Max. turning dia | 250 mm |
| Max. turning length | 150 mm |
| Bar capacity | 52 mm |
| X-axis stroke | 220 mm |
| Z-axis stroke | 200 mm |
| Spindle speed | 4000 rpm |
| Spindle nose | A2-6 |
| Spindle thru-hole dia | 62 mm |
| Spindle bearing inside dia | 85 mm |
| Type of turret | 8 |
| Height of square tool | 20 mm |
| Dia of boring bar holder | 20 mm |
| 3-jaw Chuck | 8" |
| Stroke of tailstock | 130 mm |
| Tail sleeve dia | 60 mm |
| Taper of tailstock | MT #4 |
| Tail sleeve stroke | 75 mm |
| Rapid feed speed | X:20 / Z:20 m/min |
| Spindle motor | 7.5 / 11 kw |
| Lubricating oil motor | 0.75 kw |
| Cutting oil motor | 0.25 kw |
| Servo turrent motor | 0.75 kw |
| Electric power | 15 KVA |
| Hydraulic pressure | 20 L |
| Lubricating oil | 1.8 L |
| Cutting oil | 40 L |
| Floor space (L x W) | 1850 x 1750 mm |
| Net weight | 2500 kg |
| Standard Accessories | Optional Accessories | ||
|---|---|---|---|
| ◆ 3-jaw hydraulic chuck | ◆ Bar feeder | ||
| ◆ Hydraulic system | ◆ Parts catcher | ||
| ◆ Hydraulic tailstock | ◆ Tool setter | ||
| ◆ Live center | ◆ C-axis | ||
| ◆ Coolant system | ◆ VDI turret | ||
| ◆ Morse taper sleeve | ◆ VDI tool holders | ||
| ◆ Auto lubrication system | ◆ Auto door | ||
| ◆ Working light | ◆ Chip conveyor | ||
| ◆ Heat exchanger for electrical cabinet | ◆ Chip bucket | ||
| ◆ Soft jaw | ◆ Transformer | ||
| ◆ Foot switch for chuck clamp | ◆ CE mark | ||
| ◆ MPG hand wheel | ◆ Safety torque limit clutch | ||
| ◆ Operation & maintenance manuals | ◆ Hoisting hook package | ||
| ◆ Tools and box | ◆ Levelling kit | ||
| ◆ Levelling bolts and screws | ◆ Bar feeder interface (LNS system) | ||
| ◆ OD tool holder | ◆ Additional tool holders and sleeves | ||
| ◆ Facing tool holder | ◆ SIEMENS controller | ||
| ◆ Boring bar holder & sleeves | |||
| ◆ Drill sleeves | |||
| ◆ FANUC controller | |||
| MODEL | MT-200 |
|---|---|
| Machine type | Linear (Box) |
| Machine body type | Slant |
| Swing over bed | 525 mm |
| Standard turning dia | 320 mm |
| Max. turning dia | 350 mm |
| Max. turning length | 470 mm |
| Bar capacity | 52 mm |
| X-axis stroke | 380 mm |
| Z-axis stroke | 530 / 780 mm |
| Spindle speed | 4000 rpm |
| Spindle nose | A2-6 |
| Spindle thru-hole dia | 65 mm |
| Spindle bearing inside dia | 100 mm |
| Type of turret | 12 |
| Height of square tool | 25 mm |
| Dia of boring bar holder | 40 mm |
| 3-jaw Chuck | 8" |
| Stroke of tailstock | 350 mm |
| Tail sleeve dia | 90 mm |
| Taper of tailstock | MT #5 |
| Tail sleeve stroke | 100 mm |
| Rapid feed speed | X:20 / Z:24 m/min (opt.:30 for Linear) |
| Spindle motor | 11 / 15 kw |
| Lubricating oil motor | 1.5 kw |
| Cutting oil motor | 0.37 kw |
| Servo turrent motor | 1.2 kw |
| Electric power | 22 KVA |
| Hydraulic pressure | 50 L |
| Lubricating oil | 1.8 L |
| Cutting oil | 200 L |
| Floor space (L x W) | 2950 / 3250 x 1600 mm |
| Net weight | 4100 kg |
| Standard Accessories | Optional Accessories | ||
|---|---|---|---|
| ◆ 3-jaw hydraulic chuck | ◆ Bar feeder | ||
| ◆ Hydraulic system | ◆ Parts catcher | ||
| ◆ Hydraulic tailstock | ◆ Tool setter | ||
| ◆ Live center | ◆ C-axis | ||
| ◆ Coolant system | ◆ VDI turret | ||
| ◆ Morse taper sleeve | ◆ VDI tool holders | ||
| ◆ Auto lubrication system | ◆ Auto door | ||
| ◆ Working light | ◆ Chip conveyor | ||
| ◆ Heat exchanger for electrical cabinet | ◆ Chip bucket | ||
| ◆ Soft jaw | ◆ Transformer | ||
| ◆ Foot switch for chuck clamp | ◆ CE mark | ||
| ◆ MPG hand wheel | ◆ Safety torque limit clutch | ||
| ◆ Operation & maintenance manuals | ◆ Hoisting hook package | ||
| ◆ Tools and box | ◆ Levelling kit | ||
| ◆ Levelling bolts and screws | ◆ Bar feeder interface (LNS system) | ||
| ◆ OD tool holder | ◆ Additional tool holders and sleeves | ||
| ◆ Facing tool holder | ◆ SIEMENS controller | ||
| ◆ Boring bar holder & sleeves | |||
| ◆ Drill sleeves | |||
| ◆ FANUC controller | |||
| MODEL | MT-208 |
|---|---|
| Machine type | Linear (Box) |
| Machine body type | Slant |
| Swing over bed | 545 mm |
| Standard turning dia | 350 mm |
| Max. turning dia | 350 mm |
| Max. turning length | 470 / 720 mm |
| Bar capacity | 52 mm |
| X-axis stroke | 380 mm |
| Z-axis stroke | 530 / 780 mm |
| Spindle speed | 4000 rpm |
| Spindle nose | A2-6 |
| Spindle thru-hole dia | 65 mm |
| Spindle bearing inside dia | 100 mm |
| Type of turret | 12 |
| Height of square tool | 25 mm |
| Dia of boring bar holder | 40 mm |
| 3-jaw Chuck | 8" |
| Stroke of tailstock | 350 / 500 mm |
| Tail sleeve dia | 85 mm |
| Taper of tailstock | MT#5 |
| Tail sleeve stroke | 100 mm |
| Rapid feed speed | X:20 / Z:24 m/min (opt.:30 for Linear) |
| Spindle motor | 11 / 15 kW |
| Lubricating oil motor | 1.5 kW |
| Cutting oil motor | 0.55 kW |
| Servo turret motor | 1.2 kW |
| Electric power | 30 KVA |
| Hydraulic pressure | 50 L |
| Lubricating oil | 1.8 L |
| Cutting oil | 160 L |
| Floor space (L x W) | 2300 / 3100 x 1500 mm |
| Net weight | 4350 / 4850 kg |
| Standard Accessories | Optional Accessories | ||
|---|---|---|---|
| ◆ 3-jaw hydraulic chuck | ◆ Bar feeder | ||
| ◆ Hydraulic system | ◆ Parts catcher | ||
| ◆ Hydraulic tailstock | ◆ Tool setter | ||
| ◆ Live center | ◆ C-axis | ||
| ◆ Coolant system | ◆ VDI turret | ||
| ◆ Morse taper sleeve | ◆ VDI tool holders | ||
| ◆ Auto lubrication system | ◆ Auto door | ||
| ◆ Working light | ◆ Chip conveyor | ||
| ◆ Heat exchanger for electrical cabinet | ◆ Chip bucket | ||
| ◆ Soft jaw | ◆ Transformer | ||
| ◆ Foot switch for chuck clamp | ◆ CE mark | ||
| ◆ MPG handwheel | ◆ Safety torque limit clutch | ||
| ◆ Operation & maintenance manuals | ◆ Hoisting hook package | ||
| ◆ Tools and box | ◆ Levelling kit | ||
| ◆ Leveling bolts and screws | ◆ Bar feeder interface (LNS system) | ||
| ◆ OD tool holder | ◆ Additional tool holders and sleeves | ||
| ◆ Facing tool holder | ◆ SIEMENS controller | ||
| ◆ Boring bar holder & sleeves | |||
| ◆ Drill sleeves | |||
| ◆ FANUC controller | |||
| MODEL | MT-210 |
|---|---|
| Machine type | Linear (Box) |
| Machine body type | Slant |
| Swing over bed | 545 mm |
| Standard turning dia | 350 mm |
| Max. turning dia | 350 mm |
| Max. turning length | 500 / 750 mm |
| Bar capacity | 75 mm |
| X-axis stroke | 380 mm |
| Z-axis stroke | 530 / 780 mm |
| Spindle speed | 4000 rpm |
| Spindle nose | A2-8 |
| Spindle thru-hole dia | 91 mm |
| Spindle bearing inside dia | 130 mm |
| Type of turret | 12 |
| Height of square tool | 25 mm |
| Dia of boring bar holder | 40 mm |
| 3-jaw Chuck | 10" |
| Stroke of tailstock | 350 / 500 mm |
| Tail sleeve dia | 85 mm |
| Taper of tailstock | MT #5 |
| Tail sleeve stroke | 100 mm |
| Rapid feed speed | X:20 / Z:24 m/min (opt.:30 for Linear) |
| Spindle motor | 11 / 15 kW |
| Lubricating oil motor | 1.5 kW |
| Cutting oil motor | 0.55 kW |
| Servo turret motor | 1.2 kW |
| Electric power | 30 KVA |
| Hydraulic pressure | 50 L |
| Lubricating oil | 1.8 L |
| Cutting oil | 160 L |
| Floor space (L x W) | 2300 / 3100 x 1500 mm |
| Net weight | 4500 / 5000 kg |
| Standard Accessories | Optional Accessories | ||
|---|---|---|---|
| ◆ 3-jaw hydraulic chuck | ◆ Bar feeder | ||
| ◆ Hydraulic system | ◆ Parts catcher | ||
| ◆ Hydraulic tailstock | ◆ Tool setter | ||
| ◆ Live center | ◆ C-axis | ||
| ◆ Coolant system | ◆ VDI turret | ||
| ◆ Morse taper sleeve | ◆ VDI tool holders | ||
| ◆ Auto lubrication system | ◆ Auto door | ||
| ◆ Working light | ◆ Chip conveyor | ||
| ◆ Heat exchanger for electrical cabinet | ◆ Chip bucket | ||
| ◆ Soft jaw | ◆ Transformer | ||
| ◆ Foot switch for chuck clamp | ◆ CE mark | ||
| ◆ MPG handwheel | ◆ Safety torque limit clutch | ||
| ◆ Operation & maintenance manuals | ◆ Hoisting hook package | ||
| ◆ Tools and box | ◆ Levelling kit | ||
| ◆ Leveling bolts and screws | ◆ Bar feeder interface (LNS system) | ||
| ◆ OD tool holder | ◆ Additional tool holders and sleeves | ||
| ◆ Facing tool holder | ◆ SIEMENS controller | ||
| ◆ Boring bar holder & sleeves | |||
| ◆ Drill sleeves | |||
| ◆ FANUC controller | |||
| MODEL | MT-300 |
|---|---|
| Machine type | Box way |
| Machine body type | Slant |
| Swing over bed | 670 mm |
| Standard turning dia | 400 mm |
| Max. turning dia | 400 mm |
| Max. turning length | 490 / 950 mm |
| Bar capacity | 75 mm |
| X-axis stroke | 470 mm |
| Z-axis stroke | 560/1000 mm |
| Spindle speed | 3000 rpm |
| Spindle nose | A2-8 |
| Spindle thru-hole dia | 91 mm |
| Spindle bearing inside dia | 130 mm |
| Type of turret | 10" |
| Height of square tool | 25 mm |
| Dia of boring bar holder | 40 mm |
| 3-jaw Chuck | 10" |
| Stroke of tailstock | 390 mm |
| Tail sleeve dia | 85 mm |
| Taper of tailstock | MT #5 |
| Tail sleeve stroke | 120 mm |
| Rapid feed speed | X:20 / Z:24 m/min |
| Spindle motor | 15 / 18.5 kw |
| Lubricating oil motor | 1.5 kw |
| Cutting oil motor | 0.55 kw |
| Servo turrent motor | 1.2 kw |
| Electric power | 30 KVA |
| Hydraulic pressure | 50 L |
| Lubricating oil | 1.8 L |
| Cutting oil | 160 L |
| Floor space (L x W) | 3850 / 4400 x 1900 mm |
| Net weight | 5600 / 6600 kg |
| Standard Accessories | Optional Accessories | ||
|---|---|---|---|
| ◆ 3-jaw hydraulic chuck | ◆ Bar feeder | ||
| ◆ Hydraulic system | ◆ Parts catcher | ||
| ◆ Hydraulic tailstock | ◆ Tool setter | ||
| ◆ Live center | ◆ C-axis | ||
| ◆ Coolant system | ◆ VDI turret | ||
| ◆ Morse taper sleeve | ◆ VDI tool holders | ||
| ◆ Auto lubrication system | ◆ Auto door | ||
| ◆ Working light | ◆ Chip conveyor | ||
| ◆ Heat exchanger for electrical cabinet | ◆ Chip bucket | ||
| ◆ Soft jaw | ◆ Transformer | ||
| ◆ Foot switch for chuck clamp | ◆ CE mark | ||
| ◆ MPG hand wheel | ◆ Safety torque limit clutch | ||
| ◆ Operation & maintenance manuals | ◆ Hoisting hook package | ||
| ◆ Tools and box | ◆ Levelling kit | ||
| ◆ Levelling bolts and screws | ◆ Bar feeder interface (LNS system) | ||
| ◆ OD tool holder | ◆ Additional tool holders and sleeves | ||
| ◆ Facing tool holder | ◆ SIEMENS controller | ||
| ◆ Boring bar holder & sleeves | |||
| ◆ Drill sleeves | |||
| ◆ FANUC controller | |||
| MODEL | MT-200MC |
|---|---|
| Machine type | Box / Linear way |
| Machine body type | Slant |
| Swing over bed | 450 mm |
| Max. turning dia | 250 mm |
| Max. turning length | 420 mm |
| Bar capacity | 52 mm |
| X-axis stroke | 330 mm |
| Z-axis stroke | 470 mm |
| Spindle speed | 4000 rpm |
| Spindle nose | A2-6 |
| Spindle thru-hole dia | 62 mm |
| Spindle bearing inside dia | 100 mm |
| Type of turret | 12 |
| Height of square tool | 20 mm |
| Dia of boring bar holder | 40 mm |
| 3-jaw Chuck | 8" |
| Stroke of tailstock | 435 mm |
| Taper of tailstock | MT #5 |
| Tail sleeve stroke | 100 mm |
| Rapid feed speed | X:20 / Z:24 m/min |
| Spindle motor | 7.5 / 9 kw |
| Lubricating oil motor | 1.5 kw |
| Cutting oil motor | 0.37 kw |
| Servo turrent motor | 3.7 / 5.5 kw |
| Hydraulic pressure | 25 KVA |
| Lubricating oil | 1.8 L |
| Cutting oil | 50 L |
| Floor space (L x W) | 3150 x 1610 mm |
| Net weight | 4100 kg |
| Standard Accessories | Optional Accessories | |
|---|---|---|
| ◆ Servo turret | ◆ Automatic front door | |
| ◆ Hydraulic chucks (Hard Jaw 1 set and Soft Jaw 3 sets) | ◆ Automatic bar-feeder | |
| ◆ FANUC 0i-TF controller | ◆ Sleeve chuck | |
| ◆ OD tool holders 2 sets | ◆ Part catcher | |
| ◆ ID tool holders 3 sets | ◆ Programmable tailstock | |
| ◆ U-drill tool holder 1 set | ◆ Tool probe | |
| ◆ ID sleeves ØM6, M8, M10, M12, M16, M20, M25 ( 1 pc/each ) | ◆ SIEMEMS 802D/810D/840D controller | |
| ◆ U-sleeves ØM16, M20, M25, M32 ( 1 pc/each ) | ||
| ◆ MT2 / MT3 sleeves 1 pc/each | ||
| ◆ Tailstock (Semi-Auto) | ||
| ◆ Full enclosure | ||
| ◆ Tools and box | ||
| ◆ Automatic lubrication system | ||
| ◆ Chip conveyor | ||
| ◆ C axis and VDI power turret | ||
| MODEL | MT-208MC |
|---|---|
| Machine type | Box way |
| Machine body type | Slant |
| Swing over bed | 545 mm |
| Max. turning dia | 250 mm |
| Max. turning length | 500 / 750 mm |
| Bar capacity | 52 mm |
| X-axis stroke | 180 mm |
| Z-axis stroke | 530 / 780 mm |
| Spindle speed | 4800 rpm |
| Spindle nose | A2-6 |
| Spindle thru-hole dia | 62 mm |
| Spindle bearing inside dia | 100 mm |
| Type of turret | 12 |
| Height of square tool | 20 mm |
| Dia of boring bar holder | 40 mm |
| 3-jaw Chuck | 8" |
| Stroke of tailstock | 460 / 710 mm |
| Taper of tailstock | MT #4 |
| Tail sleeve stroke | 88 mm |
| Rapid feed speed | X:24 / Z:24 m/min |
| Spindle motor | 11 / 15 kw |
| Lubricating oil motor | 1.5 kw |
| Cutting oil motor | 0.37 kw |
| Servo turrent motor | 3.7 / 5.5 kw |
| Hydraulic pressure | 30 KVA |
| Lubricating oil | 1.8 L |
| Cutting oil | 50 L |
| Floor space (L x W) | 2300 / 3100 x 1500 mm |
| Net weight | 4200 / 4800 kg |
| Standard Accessories | Optional Accessories | |
|---|---|---|
| ◆ Servo turret | ◆ Automatic front door | |
| ◆ Hydraulic chucks (Hard Jaw 1 set and Soft Jaw 3 sets) | ◆ Automatic bar-feeder | |
| ◆ FANUC 0i-TF controller | ◆ Sleeve chuck | |
| ◆ OD tool holders 2 sets | ◆ Part catcher | |
| ◆ ID tool holders 3 sets | ◆ Programmable tailstock | |
| ◆ U-drill tool holder 1 set | ◆ Tool probe | |
| ◆ ID sleeves ØM6, M8, M10, M12, M16, M20, M25 ( 1 pc/each ) | ◆ SIEMEMS 802D/810D/840D controller | |
| ◆ U-sleeves ØM16, M20, M25, M32 ( 1 pc/each ) | ||
| ◆ MT2 / MT3 sleeves 1 pc/each | ||
| ◆ Tailstock (Semi-Auto) | ||
| ◆ Full enclosure | ||
| ◆ Tools and box | ||
| ◆ Automatic lubrication system | ||
| ◆ Chip conveyor | ||
| ◆ C axis and VDI power turret | ||
| MODEL | MT-210MC |
|---|---|
| Machine type | Box way |
| Machine body type | Slant |
| Swing over bed | 545 mm |
| Max. turning dia | 250 mm |
| Max. turning length | 500 / 750 mm |
| Bar capacity | 75 mm |
| X-axis stroke | 180 mm |
| Z-axis stroke | 530 / 780 mm |
| Spindle speed | 4000 rpm |
| Spindle nose | A2-8 |
| Spindle thru-hole dia | 90 mm |
| Spindle bearing inside dia | 130 mm |
| Type of turret | 12 |
| Height of square tool | 25 mm |
| Dia of boring bar holder | 40 mm |
| 3-jaw Chuck | 10" |
| Stroke of tailstock | 410 / 710 mm |
| Taper of tailstock | MT #4 |
| Tail sleeve stroke | 88 mm |
| Rapid feed speed | X:24 / Z:24 m/min |
| Spindle motor | 11 / 15 kw |
| Lubricating oil motor | 1.5 kw |
| Cutting oil motor | 0.37 kw |
| Servo turrent motor | 3.7 / 5.5 kw |
| Hydraulic pressure | 30 KVA |
| Lubricating oil | 1.8 L |
| Cutting oil | 50 L |
| Floor space (L x W) | 2300 / 3100 x 1500 mm |
| Net weight | 4200 / 4800 kg |
| Standard Accessories | Optional Accessories | |
|---|---|---|
| ◆ Servo turret | ◆ Automatic front door | |
| ◆ Hydraulic chucks (Hard Jaw 1 set and Soft Jaw 3 sets) | ◆ Automatic bar-feeder | |
| ◆ FANUC 0i-TF controller | ◆ Sleeve chuck | |
| ◆ OD tool holders 2 sets | ◆ Part catcher | |
| ◆ ID tool holders 3 sets | ◆ Programmable tailstock | |
| ◆ U-drill tool holder 1 set | ◆ Tool probe | |
| ◆ ID sleeves ØM6, M8, M10, M12, M16, M20, M25 ( 1 pc/each ) | ◆ SIEMEMS 802D/810D/840D controller | |
| ◆ U-sleeves ØM16, M20, M25, M32 ( 1 pc/each ) | ||
| ◆ MT2 / MT3 sleeves 1 pc/each | ||
| ◆ Tailstock (Semi-Auto) | ||
| ◆ Full enclosure | ||
| ◆ Tools and box | ||
| ◆ Automatic lubrication system | ||
| ◆ Chip conveyor | ||
| ◆ C axis and VDI power turret | ||
* The above specifications subject to change without prior notice.